Can I stand on my Caesarstone® benchtop?

Always refrain from placing excessive weight on your Caesarstone® benchtop. Excessive weight can also have an impact on the underlying cabinet structure.

Can Caesarstone Mineral™ surfaces withstand heat?

Caesarstone Mineral™ is heat resistant, however like all stone materials, Caesarstone® can be damaged by sudden and rapid surface temperature changes. A good rule of thumb is that if your hand cannot tolerate the level of heat for more than a few seconds then the heat source is too high. Do not put hot cookware directly on the Caesarstone Mineral™ surface. Therefore, we always recommend placing hot pots, oven trays and fry pans directly from the oven or hot plate onto a wooden chopping board or heat trivet. We also recommend that electric fry pans, slow cookers and air fryers are also used on a wooden chopping board.

Do I need to apply a sealer to Caesarstone® mineral surfaces?

No. Caesarstone® mineral surfaces are virtually non-porous, and you will never have to use a sealer or any other kind of wax.

How durable is Caesarstone®?

Caesarstone® is resistant to all kinds of cracks, chips, scratches, and stains. However, like most materials, excessive force, high point loads, pressure or heat may cause damage to the surface. Like all surface materials, Caesarstone® should be treated with care.

Can I cut on my Caesarstone® mineral benchtop?

Caesarstone® mineral surfaces are highly durable, we recommend using a cutting board to prevent damage to the surface or knives.

Do I need to polish my Caesarstone® benchtop?

Caesarstone® surfaces come factory polished to a high lustre, with the exception of our special Concrete finish. Due to Caesarstone®’s high density and non-porous qualities, normal cleaning with a damp cloth will keep your Caesarstone® surface looking like the first day it was installed. To avoid dulling the surface's shine, make sure to use a non-abrasive cleaner such as Caesarstone® Cream Cleanser. For further detailed information on cleaning, refer to the Care & Maintenance page.

Do the Caesarstone® Concrete Finish designs require extra maintenance?

The Caesarstone® Concrete Finish designs are just as stain and scratch resistant as our polished surfaces. However, the Concrete matte finish doesn't disguise marks as well as the polished designs, meaning more regular cleaning may be required using the Caesarstone® Cream Cleanser and Scotch-Brite® Non-Scratch Foam Scrubber to provide a thorough all-over surface clean. Importantly, thoroughly rinse off the Cream Cleanser after cleaning. It's extremely important that a Caesarstone® Concrete benchtop is only ever wiped down using a clean cloth solely for that purpose. Don’t use a cloth used to wash dishes as it may impart oils and other contaminants to the concrete finish surface.

How do I clean my Caesarstone® benchtop?

Caesarstone® surfaces require very little maintenance to keep them looking like new. For everyday, routine cleaning of Caesarstone®, we recommend wiping the surface with warm soapy water (a mild detergent) and a clean damp cloth. Do not use the cloth you use to wash the dishes, as it may transfer oils and other contaminants to the Caesarstone® surface. As Caesarstone® is virtually non-porous, it will keep its lustrous gloss and ultra-smooth surface which never needs polishing or sealing. Never attempt to polish the surface and avoid prolonged rubbing in one spot when cleaning. To give your Caesarstone® surface a thorough clean or for removal of extra stubborn marks or spills, we recommend using Caesarstone® Cream Cleanser and a Scotch-Brite® Non-Scratch Foam Scrubber which can be used without damaging the stone. We suggest using this cleaning process regularly depending on the amount of traffic, use and surface application. For further detailed information, visit Care & Maintenance .

A crack has appeared in my benchtop, is this covered under the 25-Year Warranty?

Cracking is generally not covered under the Caesarstone® 25-Year Warranty as it typically occurs due to a fabrication or installation error, or as the result of mechanical stress and does not represent a fault in the Caesarstone® product itself. If a crack does occur, please contact the interior design company or stonemason who installed your bench top as they will be able to provide further assistance. External factors which can contribute to cracking include: Inadequate underbench support Incorrect placement of cutouts and joins Lack of consideration for thermal expansion, thermal shock or excessive heat A severe impact

What should I do if I damage my Caesarstone®?

In the unlikely event that you damage your Caesarstone®, please take note of the batch numbers of authenticity located on the underside of your material, and contact us on 9011 3559 or contact us online . Depending on the damage, one of our experienced technical representatives will be able to advise you of your options and possible solutions.

How can I protect my bench top from chipping?

While Caesarstone® is a very robust surface to begin with - stronger than both marble and granite in fact - there are simple measures you can take to ensure chipping doesn't occur. Sharp non-radiused edge profiles should never be used. Caesarstone® recommends a minimum radius of at least 3-4mm on any edge profile. The larger the radius, the more resistance the edge will have to impact. If the benchtop incorporates an undermount sink, then the top edge of Caesarstone® sink cut out must be a minimum radius of 6mm to minimise risk of chipping should a heavy pot hit this edge. Ensure cupboards and drawers are installed correctly and don't make contact with the Caesarstone® surface when opening and closing. Take care to not drop heavy items onto a Caesarstone® benchtop.

What should I do if I chip my Caesarstone Mineral™ surfaces?

Caesarstone Mineral™ surfaces can be easily repaired. Please call 9011 3559 to find out more.

Get in Touch

Feel free to contact us with questions via our form below and we will get back to you as soon as possible. Visit our Caesarstone Office Location here. Find Caesarstone Showroom location here.

Self service

- [email protected]
- Conract us
- +65 9011 3559
- Call Now
- 10 Bukit Batok Crescent
  #08-06
  The Spire, Singapore 658079
- +65 6316 1938
- [email protected]
- Monday – Friday:
  9.00am – 6:00pm
- Call Now

Self-service operations

Contact Us Form

No matches found

See More FAQ

Compare

was added to your compare list You need at least 2 colors to compare. Go to catalog

Compare ()

Oops, authentication failed

Sorry, we could not retrieve your email address in order to sign you in.

Signup success to catalog

By providing your details and clicking Sign Up/In, you acknowledge and agree to our website Privacy Policy,Terms of Use and Swatches Download Term of Use.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Already have an account? Sign In

Don’t have an account? Sign Up

Caesarstone trade partner?

If you’re a business or a Caesarstone trader partner, please call your local Caesarstone representative or call 6316 1938 to order samples for your project.

Your Samples

Your Products

Sub Total

Shipping

Total GST (10%)

Total

Get in Touch

Feel free to contact us with questions via our form below and we will get back to you as soon as possible. Visit our Caesarstone Office Location here. Find Caesarstone Showroom location here.

Email us

Call us

Caesarstone® SEA Pte Ltd

Self-service operations

Contact Us Form

Contact Us Form

{{ t.tl }}

{{p.tl}}

{{st.tl}}

{{sp.tl}}

{{ title }}

{{ title }}

{{ title }}

Forgot your password?

Caesarstone trade partner?